SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Forklift Parts - Without doubt, forklift parts would eventually wear out and need replacing. The alternative of acquiring new parts can become expensive so one more idea is to obtain used parts. This could save a lot of cash in the end. It is a good idea to acquire used lift truck parts which have been remanufactured. These components will ensure that you are getting parts which will work for a long time and be productive.
Worn or broken parts which are reproduced are a very cost effective solution as opposed to rebuilding. With rebuilding parts, only the components which are broken or worn out get changed, which means that other wearable parts may break down soon after acquisition.
Remanufacturing on the other hand offers the best assurance for second-hand components. Remanufactured components are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is another reason why reproduced components overall run so much better. Any component within the part is brand new and this provides much longer life to the second-hand part. Based on the forklift parts that are being redone, the cleaning process and the entire remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Various engine parts like for instance pistons, spark plugs, rings, valves, valve springs, and filters can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A complete inspection is done to check for any cracks. Bushings, seals and bearings are all replaced. Typically, the replacement parts used on transmission components meet OEM specifications.
Some forklift components like for instance torque converters, the alternator, the water pump, steer axles and the starter could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This card can likewise be remanufactured with replacing all aged and worn out components. Not like other forklift parts the control card can only have the worn and aged parts replaced.
Parts that are reproduced have to be comprehensively examined upon reassembly to ensure they are in good condition before being sold. When purchasing these components, it is a good idea to make sure that they have undergone all of the proper testing and inspections. On certain larger components such as transmissions, steer axles and engines, OEM specification replacement parts must be utilized.
The dealer of used lift trucks and parts can guarantee that the reproduced components have met OEM specifications and that these parts meet industry standards. Lots of details go into remanufacturing used components. This attention to detail offers more serviceability out of remanufactured parts than the parts that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Dickinson, North Dakota
forkliftpartsdickinson.com
Email Us
About Us