Gradall Forklift Part

Gradall Forklift Parts - Through the period when World War II created a shortage of laborers, the well-known Gradall excavator was founded in the 1940s as the creation of two brothers Ray and Koop Ferwerda. The brothers faced the problems of a depleted labor force because of the war. As partners in their Cleveland, Ohio construction company known as Ferwerda-Werba-Ferwerda they lacked the existing laborers to be able to do the delicate job of finishing and grading on their highway projects. The Ferwerda brothers opted to build an equipment that would save their company by making the slope grading work more efficient, less manual and easier.

Their first design model was a device with two beams set on a rotating platform which was affixed over a second-hand truck. A telescopic cylinder moved the beams forward and backward which allowed the fixed blade at the end of the beams to push or pull dirt. Soon improving the first design, the brothers made a triangular boom in order to add more strength. Additionally, they added a tilt cylinder that let the boom rotate 45 degrees in either direction. A cylinder was positioned at the rear of the boom, powering a long push rod to enable the machine to be equipped with either a bucket or a blade attachment.

Gradall launched in the year 1992, with the introduction of the new XL Series hydraulics, the most ground-breaking adjustment in their machinery ever since their invention. This new system of top-of-the-line hydraulics enabled the Gradall excavator to provide high productivity and comparable power to the more traditional excavators. The XL Series ended the first Gradall equipment power drawn from low pressure hydraulics and gear pumps. These conventional systems effectively handled finishing work and grading but had a difficult time competing for high productivity work.

Gradall's new XL Series excavators showed more ability to lift and dig materials. With this series, the models were made together with a piston pump, high-pressure system of hydraulics which showed noticeable improvement in boom and bucket breakout forces. The XL Series hydraulics system was likewise developed with a load-sensing capability. Traditional excavators use an operator to choose a working-mode; where the Gradall system can automatically adjust the hydraulic power for the job at hand. This makes the operator's overall work easier and even saves fuel at the same time.

As soon as their XL Series hydraulics came onto the market, Gradall was basically thrust into the highly competitive market of equipment meant to deal with demolition, pavement removal, excavating as well as different industrial work. Marketability was further enhanced with their telescoping boom because of its exclusive ability to work in low overhead areas and to better position attachments.

Click to Download the pdf

Forklift Parts

Concrete Bucket

Concrete Bucket - Lots of individuals will have a tough time comprehending how a construction project is actually completed on large structures. Lots of these current projects built nowadays would possibly be very tough to do without the latest kinds of heavy duty equipment. Construction businesses invest yearly in the latest tools and equipment to be able to assist them...

More

---

Quick Attach Work Platforms

Quick Attach Work Platform - Multipurpose lift truck work platforms connect quickly and safely to the lift truck by putting in tines into tine pockets and chaining platform to the lift truck. These enhancements are often used to efficiently and safely move maintenance workers. The fork lock or tine needs to be engaged to be able to lock the platform...

More

---

Attachments for Stand Up Forklift

Stand Up Forklift Attachments - IC engine powered lift trucks are labeled in accordance to the fuel used. Type "G" lift trucks are gasoline fueled. They meet the minimum standards for fire hazards. This is the most typical designation found on lift trucks fueled by gasoline. Forklifts labeled "G" are not used in unsafe locations for apparent reasons. Type "GS"...

More

---

Personnel Carriers

Personnel Carriers - There is actually a large variety of leaf chains that are used in the material handling industry all over the globe. A few functions can comprise use on certain saddle carriers and forklift trucks. High quality leaf chain is complete along with special design features like long service life, compact design, high fatigue strength and maximum wear...

More

---

Parts for Full Rise Scissor Lifts

Full Rise Scissor Lift Parts - Scissor pallet lift trucks are made for transporting and raising separately stacked pallets by integrating a raising mechanism that allows the pallets on the truck to be elevated. This equipment is a great device for functioning in space restricted locations that will not allow a full-sized lift truck. The scissor pallet truck is also...

More

---

Attachment for Stacker Forklift

Stacker Forklift Attachments - A pallet stacker is a kind of pallet jack that is used to move, stack and lift palletized produce that are overly difficult for manual lifting. Its key purpose is to load and unload pallets on vehicles, and also transferring pallets to and from an assortment of places within a storage space or stockroom. On the...

More

---

Drum Clamp

Drum Clamp - Forklifts are actually meant to lift, move and store products placed on pallets. For businesses which use drums, they usually need an attachment to be able to handle storing, lifting and moving them. There are some different attachments which a company can utilize for all your drum storing, lifting and moving requirements. These attachments are specially used...

More

---

Part for Articulated Boom Lift

Articulated Boom Lift Parts - A boom truck is frequently recognized by the cable and telephone company vehicles that have the elongated arm folded over their roofs. Typically, a bucket-like equipment sits at the extension of extendable arms. Normally labeled a cherry picker, or an aerial boom vehicle, a bucket vehicle has an extendable boom mounted the roof or bed....

More

---